Products...

Lab Glassware

Lab Porcelain

Lab Plastic

Lab Metal

Filter Glass

Filter Paper

Quartz Apparatus

F4(PTFE)

EMS

¡¡
¡¡

¡¡

¡¡
Burette Clamp (plastic)

Springloaded self-closing jaws. Without obscuring graduations. Central bosshead for rods up to 14mm diameter.

Code

Model
CB180-10

Double
CB180-12

Single
Double Burette Clamp (Alloy)

For two burettes from micro to 100mm size and self-closing jaws without obscuring graduations. Die-cast, high strength alloy and plastic coated.
Code

CB170-10
Single Burette Clamp (Alloy)

Almost the same as CB170-10, but for single burette usage.
Code

CB170-20
Burette Clamp (Alloy, Ni/Cr plated)

Self-closing jaws clamp the burets in rigid, upright position without obscuring graduations. Die-cast, high strength alloy.

Code

Model
CB170-30

Double
CB170-31

Single
Double Burette Clamp (plastic)

Spring loaded. Clear view for graduations. With rubber grips and central bosshead.
For rods from 11mm to 14mm in diameter.

Code

Model
CB160-10 ABS
CB160-12 PP
Single Burette Clamp (plastic)

Made of plastic. Same as CB160-10

Code

Model
CB150-10 ABS
CB150-12 PP
Four Finger Clamp (Shank)

Die-cast alloy, Ni/Cr plated finish, with cork lined interlocking jaws. Accepts articles up to 80mm in diameter.

Code

Model
CJ190-10 Chromed 
CJ190-11 Plastic coated
Four Finger Clamp (Shank)

Die-cast alloy, Ni/Cr plated finish, with cork lined interlocking jaws. Accepts articles up to 80mm in diameter.

Code

Model
CJ200-10 Chromed 
CJ200-11 Plastic coated
Four finger swivel clamps

Chrome plated, zinc-alloy, for articles up to 80mm in diameter. And rotete 360 degrees, locks in any position.

Code

Model 

Size
SW300-80 UK type 0-80mm
SW300-90 EU type 0-80mm
¡¡ Round jaws universal clamps

Code 

Model

Size
FW150-30 Shank 30mm
FW150-50 Shank 50mm
SW150-30 Swivel 30mm
SW150-50 Swivel 50mm
Three Finger Clamp (Large)

Die-cast alloy. Chrome or plastic coated finish. With three coated jaws. Accepts articles up to 70mm.

Code 

Model

Size
CJ170-10 Chrome 0-70mm
CJ170-11 Plastic coated 0-70mm
Three finger swivel clamp (large)

PVC coated prong. Made of zinc-alloy and chrome plated. For articles from 0 to 70mm in diameter.
Code

SW300-40
Three finger clamps (Small, Medium)

Made of chrome plated alloy with three PVC coated prongs.

Code

Model 

Size
CJ170-20 Small 0-25mm
Cj170-21 Medium 0-50mm
¡¡ Swivel three finger clamp

Made of chrome plated metal with three PVC coated prongs. Use for burettes and tubes.

Code

Model

Size
CJ170-20 Small 0-25
Cj170-21 Medium 0-50
¡¡ Three finger double adjust clamp (large)

Double adjustable, PVC coated prongs. Made of chrome plated zinc-alloy. Accept objects from 0 to 60mm.
Code

FW200-70
Three finger double adjust swivel clamp (large)

Same as FW200-70, with bosshead for rod max.dia. Up to 21mm
Code

SW200-70
Three finger double adjust clamp (small)

Double adjustable, PVC COATED PRONGS. Made of chrome plated zinc-alloy. Accepts objects from 0 to 30mm.
Code

FW200-30
¡¡ Three finger double adjust swivel clamp (Small)

Same as FW200-30, with bosshead for rod up to 21mm.
Code SW200-30
Three prong fixed bosshead clamp

Made of chrome plated zinc-alloy for dia. from 4 to 20mm.
Code FB200-20
Two prong extension clamps (medium)

Made of Ni/Cr plated zinc alloy, PVC coated prongs
Accept articles from 12 to 45mm.
Code FW100-45
Two prong swivel clamp (medium)

Swivel clamps with pvc coated prongs to accommodate articles at any angle. Chrome plated zinc alloy. For item from 12 to 45mm.
Code SW100-45
Two prong extension clamps (Small)

Made of Ni/Cr plated zinc alloy, PVC coated prongs. Accepts articles from 7 to 25mm.
Code FW100-25
Two prong swivel clamp (Small)

Swivel clamps with PVC coated prongs to accommodate articles at any angle. Chrome plated zinc alloy. For item from 7 to 25mm.
Code SW100-25
¡¡ Two prong fixed bosshead clamp

Two prong bosshead burette and tube clamp (FB100-25). Made of Ni/Cr plated zinc-alloy, with PVC coated double prongs.

Code

Model

Size
FB100-25 Small 7-25mm
FB100-45 Medium 12-45mm
Chain clamp

With chain and spring, made of AISI304 stainless steel. For dia. From 80mm to 150mm.

Code CC400-145
Universal Clamp

Plastic coated alloy, stamped steel rod shank. Recommended for condensers and irregular shapes.
Code CJ202-26
Suspension clamp

Hold thermoters, drying tubes or other item.

Code

Model
SC350-10 Single prong
SC350-20 Double prong
Thermometer extension clamp

Extension rod 10mm in dia. Total length: 200mm
Code ST200-15
Thermometer swivel clamp

Same as ST200-15, but with adjustable bosshead.
Code ST120-15
Double clamps (Medium + Small)

One jaw grips object up to 45mm, the other jaw grips object up to 25mm, rotates 360 degrees
Code TT600-10
Universal clip (Brass)
Code CJ180-10 (Large) CJ180-14 (Medium)
Universal clip (Steel)
Code CJ200-16 (Large) CJ200-18 (Medium)
Universal clip (S/S)
Code CJ201-20 (Large) CJ201-22 (Medium)
Flask clip
Code CJ204-28 (Alloy) CJ201-30 (Sheet metal)
Beaker Tong

For beakers. Flat hinge. Overall length 275mm.

Code

Model
CJ205-30 PVC coated
TB600-10 Rubber covered
¡¡ Bosshead

Perfect for mixer use, high strength and sturdy. Open: 19mm
Code B200-08
Bosshead

High-strength and sturdy. One end open: 23mm, the other end open: 38mm
Code CB200-08
Bosshead

Die-cast alloy with nickel plated "T" screw head. For rods up to 16mm diameter.
Code CB200-10
Bosshead

Die-Ccast alloy, Blue head screw. For rod up to 15mm.
Code CB200-12
¡¡ Bosshead

Chrome plated finish, plastic headed screws. For rods up to 15mm diameter.
Code CB200-15
Universal boss head

Multipurpose use for round or rectangular rods up to 12mm. T cross and parallel arrangements.

Code 

Model
CB290-10 Plastic coated 
CB290-20 Chrome plated
Bosshead

For rods Dia.

Black

Chrome plated

 White
13mm CB203-13 CB201-13 CB202-13
16mm CB203-16 CB201-16 CB202-16
21mm CB203-21 CB201-21 CB202-21
25mm CB203-25 CB201-25 CB202-25
Angle adjustable four finger clamp

Alloy with cork lined jaws and a hinge joint of 180-degree rotation angle. For article 0-80mm.

Code

Model
SJ280-10 Plastic coated
SJ280-11 Chrome
Three finger extension clamp (medium)

Single adjustable, max opening: 75mm, chrome plated, shank: 12mm dia.
Code FP270-70
Three finger extension clamp (small)

Single adjustable max opening: 30mm, Chrome plated, shank:10mm dia.
Code FP270-30
¡¡ Two prong double adjust extension clamp (large)

Die-cast alloy, chrome plated, rod: 12mm dia. Max opening: 65mm
Code FT260-65
Two prong double adjust extension clamp (small)

Die-cast alloy, chrome plated, rod: 10mm dia. Max opening: 40mm
Code FT260-40
¡¡ Three prong single adjust swivel clamp (medium)

Chrome plated. For object: 0-70mm.
Code SP270-70
Three prong single adjust swivel clamp (small)

Chrome plated. For object: 0-30mm.
Code SP270-30
Two prong double adjust swivel clamp (large)

Chromed alloy. For articles 0-65mm.
Code ST260-65
Two prong double adjust swivel clamp (small)

Chromed alloy. For articles 0-40mm.
Code ST260-40
Double rotating clamp

Chrome plated alloy, 360 degree adjustable

Code

Opening
BB180-19 21mm
BB180-16 16mm
¡¡ Glass tube cutter

Zinc alloy, chrome plated, for tubes diameters up to 30mm.

Code

Size
CB600-30 30mm
CB600-50 50mm
Double clamp for rod

Ni/Cr plated, for fixing perpendicular structures.

Code

For rod dia.
CB280-10 10mm
CB280-12 12mm
CB280-14 14mm
CB280-16 16mm
Ball type bosshead

Chrome plated alloy, suitable for multilevel and three dimension constructions.

Code

For rod dia.
CB270-13 7-13mm
CB270-25 15-25mm
Universal bosshead

For cross and parallel arrangement, chrome plated alloy.

Code

For rod dia.
CB260-16 16mm
CB260-27 27mm
Test Tube Holder (Metal wire)

Spring steel. Hold tubes up to 30mm diameter.

Model

Plated Steel

AISI304
without finger grip TH800-10 TH801-10
with finger grip TH800-20 TH801-20
Test Tube Holder (Hard Wood)

With steel spring for tubes up to 20mm.
Code TH810-10
Alloy test tube and thermometer holder

Chrome plated alloy, with spring loaded jaws. For tube 0-25mm.

Code

Model
FD100-25 Chromed
TH810-20 Plastic coated
Test tube and thermometer swivel holder (alloy)

Chrome plated alloy, with bosshead and spring loaded jaws. For tube 0-25mm.

Code

Model
SD100-25 Chromed
TH810-21 Plastic coated
Mohr's Tubing Clip (spring steel)

According to Mohr, made of spring steel.

Code

Model

Total Length
TC100-14 ¡¡ 45mm
TC100-24 ¡¡ 60mm
Spring tubing clamps

Center hinged spring and acetal plastic, provide On/Off flow control for flexible tubing.

Code

For tubing Dia.
TC300-08 0-8mm
TC300-12 0-10mm
Hoffman side hinged clip

Zinc-alloy Nickel plated with control thumb screw.
Code TH100-08
Hoffman's tubing clip

Hoffman type, brass made, bottom hinged and nickel plated. Allow variable flow control.

Code

Max. opening
TH200-12 12
TH200-17 17
TH200-20 20
TH200-25 25
TH200-30 30
TH200-40 40
Mohr's Tubing clip

According to Mohr. Made of brass, Nickel plated.

Code

Total length
TC200-40 40mm
TC200-50 50mm
TC200-60 60mm
TC200-70 70mm
TC200-80 80mm
Mohr's Tubing Clip

According to Mohr. Made of brass, Nickel plated. One piece design.

Code

Total length
TC201-50 50mm
TC201-60 60mm
TC201-70 70mm
TC201-80 80mm
Crucible tongs

Flat hinge. Bowed type. Dimension given is overall length.

Plated Steel 

Stainless steel

Total length
TA500-150 TA600-150 150mm
TA500-200 TA600-200 200mm
TA500-220 TA600-220 220mm
TA500-250 TA600-250 250mm
TA500-300 TA600-300 300mm
TA500-350 TA600-350 350mm
TA500-400 TA600-400 400mm
TA500-450 TA600-450 450mm
TA500-500 TA600-500 500mm
TA500-600 TA600-600 600mm
Crucible tongs

Flat hinge. Straight type. Dimension given is overall length.

Plated Steel

Stainless steel

Total length
TA700-150 TA800-150 150mm
TA700-200 TA800-200 200mm
TA700-220 TA800-220 220mm
TA700-250 TA800-250 250mm
TA700-300 TA800-300 300mm
TA700-350 TA800-350 350mm
Dish forcep

Made of AISI304, three finger type for stable operation.

Code

Length
TB400-10 240mm
TB400-20 300mm
Spherical Joint Pinch Clamps.

Spring closing action. Unique forked shaped jaws provide uniform compression for safe, leak-free seals. Screw Locking device for maximum security. Stainless steel bright polished finish for years of chemical resistance.

Code

Size

Code

Size
CS610-12 12 CS610-35 35
CS610-18 18 CS610-50 50
CS610-28 28 CS610-65 65
Conical head clips

Made of plastic (POM)

Code

Size

Colour
CC210-10 10 Green
CC210-12 12 Purple
CC210-14 14 Yellow
CC210-19 19 Blue
CC210-24 24 Green
CC210-29 29 Red
CC210-34 34 Orange
CC210-40 40 Yellow
CC210-45 45 Brown
Conical head clips (S/S)

Made of stainless steel, bright polished.

Code

Size
CC200-10 10/19
CC200-12 12/21
CC200-14 14/23
CC200-19 19/26
CC200-24 24/29
CC200-29 29/32
CC200-45 45/40
Crocodile clips

Plastic covered jaws.

Code

Colour
CR030-12 Red
CR030-14 Black
Forceps (4pcs/set)

Stainless Steel

Code

Model
1.FC100-10 With strong tips for generaluse
2.FC100-30 Withcurved tips
3.FC100-20 With flat and wide tips for stamps, wafers, cover-glasses and medicine.
4.FC100-40 Fine, permanent sharp. Reversible action.
Laboratory Forceps

Stainless steel

Code

Model
A.FC210-125 Straight forcep round tips, total length:125mm
B.FC211-120 Sprung straight forcep with fine tips, total length :120mm
C.FC212-120 Flat and wide tips, total length :120mm
D.FC213-126 Fine tips. Total length: 126mm
E.FC214-102 Straight forcep round tips, total length:102mm
G Clamp

Cast iron, with ball end for surface protection, painted black and blue.

Black

Blue

Range
GC100-10 GC170-10 0-25mm(1")
GC100-20 GC170-20 0-50mm(2")
GC100-30 GC170-30 0-75mm(3")
GC100-40 GC170-40 0-100mm(4")
GC100-50 GC170-50 0-125mm(5")
Test Tube Rack

Code

Model

Tubes

Dia.
ST300-10 PVC coated 6¡Á2 16mm
ST300-20 PVC coated 6¡Á2 25mm
ST300-30 AISI304 6¡Á2 16mm
ST300-40 AISI304 6¡Á2 25mm
Weight Ring

Cast iron, PVC coated rings. For stabilizing Erlenmeyer flasks immersed in water.

Code

Weight (kg)

I.D. (mm)

Flasks
WR300-48 0.22 48 125-700ml
WR300-56 0.45 56 250-1000ml
WR300-61 0.68 61 700-2000ml
WR300-74 0.91 74 1-4L
Test Tube Racks (plastic)

Made of a blend of plolyproplene. Locking feels allow racks to be stacked while not in use. Rows are numbered and lettered for tube identification. Available in five sizes and five colours.

White

Red

Blue

Yellow

Green

O.D.

Tubes

Rows
A1989-1000 A1990-1000 A1991-1000 A1992-1000 A1993-1000 13mm 90 6¡Á15
A1989-1001 A1990-1001 A1991-1001 A1992-1001 A1993-1001 16mm 60 5¡Á12
A1989-1002 A1990-1002 A1991-1002 A1992-1002 A1993-1002 20mm 40 4¡Á10
A1989-1003 A1990-1003 A1991-1003 A1992-1003 A1993-1003 25mm 24 3¡Á8
A1989-1004 A1990-1004 A1991-1004 A1992-1004 A1993-1004 30mm 21 3¡Á7
Test Tube Rack

Code

Model

Tubes 

Dia.
ST400-10 PVC coated 6¡Á4 16mm
ST400-20 PVC coated 6¡Á4 25mm
ST400-30 AISI304 6¡Á4 16mm
ST400-40 AISI304 6¡Á4 25mm
Test Tube Rack (z type)

Made of anodised alunium.With holes arranged in 5 rows ¡Á10 holes, and alphanumeric engraved for cross reference, guide from 1 to 10 and A to E.

Code

Holes Dia.

Rows
ST450-012 12.2 5¡Á10
ST450-014 14.5 5¡Á10
ST450-017 17.5 5¡Á10
ST450-28M Multi hole 28mm¡Á5
19mm¡Á6
13mm¡Á8
Test Tube Rack

Made of metal sheet, three rows arrangement.

Code 

Model

Tube Size

Array
ST500-20 Aluminium 18.5mm 10¡Á3
ST500-30 Aluminium 15.5mm 10¡Á3
ST500-40 Aluminium 22¡Á8mm
18.5¡Á7mm
15.5¡Á8mm		 10¡Á3
ST500-50 Coated Steel 18.5mm 10¡Á3
ST500-60 Coated Steel 15.5mm 10¡Á3
ST500-70 Coated Steel 22¡Á8mm
18.5¡Á7mm
15.5¡Á8mm		 10¡Á3
ST500-80 SUS430 18.5mm 10¡Á3
ST500-90 SUS430 15.5mm 10¡Á3
Nessler Tube Racks

Molded white polypropylene. Supplied in 5 pieces for easy snap together assembly. The racks have 6 places.

Code

Model

Arrange
CD910-050 50ml 6¡Á1
CD910-100 100ml 6¡Á1
CD920-010 10ml 6¡Á2
CD920-025 25ml 6¡Á2
Test Tube Racks (plastic)

One piece design which can be folded to shape by the user without the use of tools. Made of a blend of plolyproplene. Locking feels allow racks to be stacked while not in use. Rows are numbered and lettered for tube identification. Available in five sizes and five colours.

White

Red

Blue

Yellow

Green

O.D.

Tubes

Rows
A1994-1000 A1995-1000 A1996-1000 A1997-1000 A1998-1000 13mm 90 6¡Á15
A1994-1001 A1995-1001 A1996-1001 A1997-1001 A1998-1001 16mm 60 5¡Á12
A1994-1002 A1995-1002 A1996-1002 A1997-1002 A1998-1002 20mm 40 4¡Á10
A1994-1003 A1995-1003 A1996-1003 A1997-1003 A1998-1003 25mm 40 4¡Á10
A1994-1004 A1995-1004 A1996-1004 A1997-1004 A1998-1004 30mm 24 3¡Á8
¡¡ Test Tube Rack

Made of PP, with six holes 25mm diameter, ideal for classroom work and 6 draining pegs. Supplied flat and is easy to assemble for use or disassemble for storage.
Code DR200-06
Draining Rack

Made of plastic coated steel. Wire tips are PVC covered.

Code

Position

Size(High¡ÁWide)
DR650-50 55 650¡Á360
DR650-48 48 500¡Á400
DR650-32 32 300¡Á400
Horizon Pipette Rack

Made of PP, support 12 straight or small bulb pipette over 200mm long. Complete with two end pieces and three connecting rods for easily assembly.
Code TT650-10
Pipette Stand

Moulded in white polypropylene. Accept 44 pipettes of up to 15mm. Very stable with 30mm diameter base.

Code 

Model
TT660-44 With rotating base
TT660-10 without base
Tripod Support
Code TJ100-10
Tripod Support

Cast iron plastic coated, circular and flat top.

Code

Model
TJ140-90 90mm
TJ140-120 120mm

Tripods

Tripod stands. Height 200mm

Triangular top

Circular top

Iron Rod

Stainless

Iron Rod

Stainless

Side Length
TJ100-125 TJ110-125 TJ120-125 TJ130-125 125mm
TJ100-150 TJ110-150 TJ120-150 TJ130-150 150mm
TJ100-200 TJ110-200 TJ120-200 TJ130-200 200mm
Laboratory Jacks

Aluminium plates providing a rigid support platform. The scissor action movement is activated by a large control knob. LJ450 have a tapped hole with locking nut in the top plate which accepts an M10 threaded retort rod.

Code

Size(mm)

Max Height(mm)

Max Static Load (kg)
LJ450-100 100¡Á100 140 30
LJ450-150 150¡Á150 280 60
LJ450-200 200¡Á200 290 60
LJ450-250 250¡Á250 380 60
Laboratory Jacks

Scissor action movement. Controlled by a large knob. Steel top and bottom plates.

Size

Stainless Steel

Plated Steel

Plastic Coated
150¡Á150 LJ480-150 LJ460-150 LJ500-150
200¡Á200 LJ480-200 LJ460-200 LJ500-200
Retort Stand Base

Made of cast iron, painted blue, complete with retort rod.

Code 

Size

Rod Length ¡ÁDia.
AA330-140 200¡Á140mm 600¡Á10mm
AA330-180 300¡Á180mm 700¡Á10mm
Marble Retort Stand Base

Black natural marble base with 8mm dia hole for retort rod and rubber feet. With rod 700¡Á10mm dim. 200¡Á150¡Á30mm
Code AA410-320
Rerort Stand Base

Metal sheet base,complete with rod.

Painted Steel

Stainless Steel

Base size

Rod
AA380-175 AA400-175 175¡Á100 450¡Á9mm
AA380-225 AA400-225 225¡Á125 500¡Á10mm
AA380-230 AA400-230 230¡Á130 600¡Á10mm
AA380-250 AA400-250 250¡Á150 600¡Á10mm
AA380-300 AA400-300 300¡Á150 700¡Á12mm
Rectangular Retort Stand Bases

Cast iron, with hole tapped M10¡Á1.5mm and rubber feet in the short side.

Blue Paint

Size (mm)
A390-240 115¡Á75
A390-250 160¡Á100
A390-260 200¡Á125
A390-270 250¡Á160
A390-280 315¡Á200
A Shape Retort Stand Base

Cast iron, finished in blue paint with hole tapped M10¡Á1.5mm and rubber feet.

Code

Side Length

Rod
AA420-150 150mm 600¡Á10mm
AA420-151 200mm 700¡Á10mm
H Shape Support Stand Base

Three vertical rods and two horizontal rods, six bosshead.

Base Size

Rod Length

10mm Rod

12mm Rod
500¡Á250 800mm AA100-010 AA100-012
400¡Á200 700mm AA200-010 AA200-012
Marble Retort Stand Base

Natural Marble base Dim: 300¡Á150¡Á30mm Rod:700¡Á10mm.
Code AA300-150
Glass Retort Stand Base

Cast iron base and glass platform. Dim: 300¡Á150¡Á30mm Rod:700¡Á10mm.
Code AA360-190
Tripod Retort Stand Bases

Cast iron finished in blue paint with rod hole tapped M10¡Á1.5mm and rubber feet. Dimension given is approximate spread from rod to foot.

Code

Size
AA320-85 85mm
AA320-110 110mm
AA320-135 135mm
AA320-175 175mm
Close Retort Ring with Bosshead

3pcs/set
Code AA300-100 Other size available.
Circular Support Platforms with Bosshead

Made of chromed bosshead and plastic coated platform.

Code

Size
HO400-80 80mm
HO400-150 150mm
Open Ring Retort Support with Bosshead.

Made of Ni/Cr plated steel

Part No.

Ring Dia.
HO330-50 50mm
HO330-60 60mm
HO330-80 80mm
HO330-100 100mm
HO330-120 120mm
HO330-140 140mm
Other size available.
Open Ring Retort Support with Bosshead

Made of Ni/Cr plated steel

Part No.

Ring Dia.
HO320-50 50mm
HO320-60 60mm
HO320-80 80mm
HO320-100 100mm
HO320-120 120mm
HO320-140 140mm
Other size available.
Close Ring Retort Support

Made of Ni/Cr plated steel

Part No.

Ring Dia.

Length
HO310-60 60mm 180mm
HO310-80 80mm 195mm
HO310-100 100mm 200mm
HO310-120 120mm 215mm
HO310-140 140mm 225mm
Other size available.
¡¡
Open Ring Retort Support

Made of Ni/Cr plated Steel

Part No.

Ring Dia.

Length
HO300-60 60mm 180mm
HO300-80 80mm 195mm
HO300-100 100mm 200mm
HO300-120 120mm 215mm
HO300-140 140mm 225mm
Other size available.
Ceramic Plates

Iron wire and square shape. Ceramic centers contains no asbestors.

Open Mesh (AISI304)

With Ceramic Center
CP900-100 (100¡Á100) CP850-100 (100¡Á100)
CP900-120 (120¡Á120) CP850-120 (120¡Á120)
CP900-125 (125¡Á125) CP850-125 (125¡Á125)
CP900-140 (140¡Á140) CP850-140 (140¡Á140)
CP900-150 (150¡Á150) CP850-150 (150¡Á150)
CP900-160 (160¡Á160) CP850-160 (160¡Á160)
CP900-180 (180¡Á180) CP850-180 (180¡Á180)
CP900-200 (200¡Á200) CP850-200 (200¡Á200)
CP900-250 (250¡Á250) CP850-250 (250¡Á250)
Support Stand Kits - A

700mm high ¡Á701mm long

Code

Material
KS070-070 Stainless steel rod
KA070-070 Aluminium rod
KT070-070 Steel rod
Made up of :8 rods 700mm long,2rods 350mm long,16 bosshead, 4 foot supports,1 hex key
Support Stand Kits - B

700mm high ¡Á1000mm long

Code

Material
KS070-100 SUS304 rod
KA070-100 Aluminium rod
KT070-100 Steel rod
Made up of :4 rods 1000mm long,5 rods 750mm long,2 rods 350mm long,20 bosshead, 4 foot supports,1 hex key
Support Stand Kits - C

1000mm high ¡Á1000mm long

Code

Material
KS100-100 S.S. rod
KA100-100 Aluminium rod
KT100-100 Steel rod
Made up of :10 rods 1000mm long,2 rods 700mm long,3 rods 350mm long,34 bosshead, 6 foot supports,1 hex key
Support Stand Kits - D

1000mm high ¡Á2000mm long

Code

Material
KS100-200 S.S. rod
KA100-200 Aluminium rod
KT100-200 Steel rod
Made up of: 5 rods 2000mm, 7 rods 1000mm long, 8 rods 200mm long, 2 rods 350mm long,45 bosshead, 8 foot supports, 1 hex key


Mounting foot support

Cast iron and plastic coated.

Model 

10mm Rod 

12mm Rod 

14mm Rod

16mm Rod
Vertical  MF010-10 MF012-10 MF014-10 MF016-10
Horizontal MF010-15 MF012-15 MF014-15 MF016-15
3 Dimension MF010-20 MF012-20 MF014-20 MF016-20
4 Places Crucible Support

Dim: 135mm long ¡Á 135mm wide ¡Á 60mm high
Code TT100-04
6 Places Crucible Support

Dim: 125mm long ¡Á 90mm wide ¡Á 50mm high
Code TT100-06
Square Crucible Support

Dim: 205mm long ¡Á 130mm wide ¡Á 45mm high
Code TT100-10
Furnel Holder

Code

Model
BB180-02 2 Support
BB180-04 4 Support
Teclu Burner

With air regulator and gas control needle valve. Burner tube: 13mm O.D, height: 125mm.

Code

Gas Type
BY125-10 Natural gas
BY125-20 Liquid propane gas
BY125-30 Artificial gas
Bunsen Burner

With threaded needle valve, air regulator and aluminum mixing tubes for thorough air/gas mixing, nickel plated, I\die-cast zinc alloy base.

Code

Gas Type
BY110-10 Natural gas
BY110-20 Liquid propane gas
BY110-30 Artificial gas
¡¡ Bunsen Burner

With die cast alloy base. Inlet tube for 8mm flexible tubing. Height: 150mm. Tube diameter: 16mm O.D.

Code

Gas Type
BY120-10 Natural
BY120-20 Liquid propane
BY120-30 Artificial
Tirrill Burners

Provide a clear noiseless flame adjustable to any height from 1/2" to 12", great for slow heating or quick boiling. With threaded aluminum air control sleeve, brass needle valve, aluminum mixing tubes and octagonal base.

Code

Gas Type
BY130-10 Natural
BY130-20 Liquid propane
BY130-30 Artificial
Micro Burners

Provide a small intense flame. With serrated gas inlet connection, aluminum mixing tube, air regulator and gas control needle valve.

Code

Gas Type
BY140-10 Natural
BY140-20 Liquid propane
BY140-30 Artificial
High Temperature Burners

With grid tops, provide uniform heat with no back flashes. One piece nickel plated venturi tube to thoroughly mix air and gas.

Code

Gas Type
BY150-10 Natural
BY150-20 Liquid propane
BY150-30 Artificial
Butane Gas Bottle Burner

Tube Dia. 14mm, Direct working pressure rate output 0.75 at 1 bar.
Code BY160-10
Meker Burner

With pilot flame, gas and air regulator. Total height: 170mm.

Code

Gas Type
BY155-10 Natural
BY155-20 Liquid propane
BY155-30 Artificial
Medical Spoon (spoon)

Stailess steel SUS430. All size.

Code

Size (mm)
SS330-125 125
SS330-150 150
SS330-160 160
SS330-180 180
SS330-200 200
SS330-210 210
SS330-230 230
Spoon/Spatulas

Stainless steel SUS430. Spoon/flat pattern.

Code

Length (mm)
SP120-150 150
SP120-175 175
SP120-200 200
SP120-230 230
Spoon/Spatulas

Stainless steel AISI304. Spoon/flat.

Code

Length (mm)
SP125-125 125
SP125-150 150
SP125-210 210
Spoon/Grooved Spatulas

Stainless steel. Spoon/flat pattern.

Code

Size (mm)
SP130-120 120
SP130-140 140
SP130-160 160
SP130-180 180
Spatulas

Stainless steel AISI304. One end rounded and bend up, one end square.

Code

Length (mm)
SP110-100 100
SP110-120 120
SP110-125 125
SP110-140 140
SP110-150 150
SP110-160 160
SP110-180 180
SP110-200 200
SP110-220 220
SP110-230 230
Other size available.
Spoon/Flat

Stainless steel AISI304.

Code

Model
A. SP113-210 Flat spoon end spatula.Length: 210mm
B. SP114-190 Grooved spatula. With angled spoon. Length: 190mm.
C.SP115-195 Trulla pattern. Length: 195mm.
Spoon

Brass and AISI304 stainless steel.

Code

Spoon Dia.

Material
CC110-10 21mm Cu
CC110-20 21mm S/S304
CC110-30 30mm Cu
CC110-40 30mm S/S304
¡¡ Sodium Spoon

Complete with brass basket and handle. Dia. 25mm, total length: 190mm.
Code SP500-10
Deflagration Spoon

Stainless steel with flange cap.

Code

Length

Flange Dia.
DS200-050 200 60
DS200-060 300 90
DS200-090 400 90
Precision school balance

Designed to be versatile, precise and easy to manage. Brass beam with 2 pans, Zero-adjust wheel. Manual damping arrest brings the pointer to rest quickly and speed up weightings. Introduces elementary and secdondary school students to more advanced principles in a sturdy, low-cost balance. Supoplied complete with 16-piece brass & stainless steel weight set, 10mg-50g.
Capacity: 100 grams. Readout: 0.01 gram. Pan: 80 mm (stainless steel), Bearing: steel.
Code PB100-10
Weight set

Hard wood weight set holder. Weight is brass made nickle plated.

Weight (g)

Qty: pcs

Weight (mg) 

Qty: pcs
50 1 50 1
20 1 20 1
10 2 10 2
5 1 5 1
2 2 2 2
1 1 1 1
Other Weight sets available.
Code: WS100-10


Kolle Handles

Meatal handle with loop end of Ni/Cr. Completed with 2loop ends.

Code

Length (mm)

Model
KH200-10 200 Short size
KH290-10 290 Long size
HT100-10 50 Loop end (Loop Dia. 3mm)
HT100-20 50 Sharp end
HT100-30 50 Blade end
Cork Borer Sets

Nickel plated brass. Each set complete with push rod forcleaning.

Code

Sets

O.D. (mm)
CB580-03 3 5-7.5
CB580-06 6 5-11.25
CB580-12 12 5-18.75
CB580-18 18 5-26.25
Other size available.
Cork Borer Sharpener

Die-cast alloy. Suitable for all borers of CB580 series.
Code CB590-10
Glass tube cutter

For tubes Dia. Up to 30mm.

Code

Size
CB600-30 30mm
CB600-50 50mm
Pipette Filler

Chemical resistant rubber with 3valves for suction, evacuate and air release.

Code

Model

Colour
PF210-10 Standard Red
PF210-20 Standard Green
PF210-30 Standard Black
PF220-10 Long Red
PF220-20 Long Green
PF220-30 Long Black
Pipette Pump

Color coded for safe and accurate pipetting even with corrosive or toxic liquids. Easy to fit, operate and cleaning.

Code

Color

Max Vol.
PF300-02 Blue 2ml
PF300-10 Green 10ml
PF300-25 Red 25ml
¡¡ Micropipettors

Lightweight and ergonomic design. For accurate pipetting and easy cleaning. Fixed, Variable and multichannel volume available. Individually certified with serial number.

Code 

Model 

Volume (¦Ìl)

Steps (¦Ìl)

Accuracy (¡À%)

Precision(¡À%)
PF500-50 Fixed 50 N £¼4 £¼2
PF500-60 Fixed 100 N £¼4 £¼2
PF500-70 Fixed 200 N £¼4 £¼2
PF500-80 Fixed 250 N £¼4 £¼2
PF500-90 Fixed 500 N £¼4 £¼2
PF500-100 Fixed 1000 N £¼4 £¼2
PF500-110 Fixed 2000 N £¼4 £¼2
PF510-30 Variable 50-200 1.0 £¼4 £¼3
PF510-30 Variable 200-1000 5.0 £¼4 £¼3
PF520-20 8 Channel 50-250 5.0 £¼4 £¼3
Test Tube Brush
¡¡
Cork Stand

For round bottom flasks.

Code

Diameter

For Flasks
CR450-80 80mm 50-100ml
CR450-100 100mm 250ml
CR450-120 120mm 500ml
CR450-140 140mm 1000ml
Petri Dish Sterilize Container

Made of AISI304 stainless steel, complete with rack for petri dish.

Code

Size
SC400-10 105mm I. D. ¡Á 260mm high
SC400-20 130mm I. D. ¡Á 260mm high
SC400-30 130mm I. D. ¡Á 400mm high
Autoclave Basket

Made of AISI304 stainless steel. 3mm Dia. Perforation.

Code

Size
AB100-10 210mm Dia. ¡Á 150mm high
AB100-20 220mm Dia. ¡Á 240mm high
AB100-30 280mm Dia. ¡Á 200mm high
AB100-40 380mm Dia. ¡Á 280mm high
AB100-50 480mm Dia. ¡Á 220mm high
Hand Protectors

Silicone rubber, with grip for safe handling. Withstand -50 to +250¡æ temperature.

Code

Model 

Material
HP190-100 big Silicone Rubber
HP190-90 big Natural Rubber
HP190-80 small Silicone Rubber
HP190-70 small Natural Rubber

¡¡

¡¡

¡¡